S3305 High-Torque Standard w/Metal Gears
This is the Futaba S3305 High Torque, Metal Gear Servo. per Futaba this servo is approved for use with NiCd batteries ONLY!
This servo can produce high-current draw from batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
High torque servo
Two ball bearings
3-pole motor
Standard Futaba J style connector
Metal gears
SPECS: Length: 1.6" (40mm) not including mounting flanges
Length: 1.9" (49.5mm) at center of mounting flanges
Width: 0.8" (20mm) total
Width: 0.39" (10mm) at center of mounting flanges
Height: 1.5" (38mm) not including servo horn
Weight: 1.64oz (46.5g)
Speed: 0.25 sec/60° @ 4.8V; 0.20 sec/60° @ 6V
Torque: 99 oz-in (7.1 kg-cm) at 4.8V; 124 oz-in (8.9 kg-cm) at 6V
Product Type: Servo
Manufacturer: Futaba
Product: S3305 High-Torque Standard w/Metal Gears
Torque: 99 oz-in (7.1 kg-cm) at 4.8V
Bearings: 2-ball bearings
Gears: All Metal Gears
Street Price: $32.99
This is the Futaba S3305 High Torque, Metal Gear Servo. per Futaba this servo is approved for use with NiCd batteries ONLY!
This servo can produce high-current draw from batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
High torque servo
Two ball bearings
3-pole motor
Standard Futaba J style connector
Metal gears
SPECS: Length: 1.6" (40mm) not including mounting flanges
Length: 1.9" (49.5mm) at center of mounting flanges
Width: 0.8" (20mm) total
Width: 0.39" (10mm) at center of mounting flanges
Height: 1.5" (38mm) not including servo horn
Weight: 1.64oz (46.5g)
Speed: 0.25 sec/60° @ 4.8V; 0.20 sec/60° @ 6V
Torque: 99 oz-in (7.1 kg-cm) at 4.8V; 124 oz-in (8.9 kg-cm) at 6V
Product Type: Servo
Manufacturer: Futaba
Product: S3305 High-Torque Standard w/Metal Gears
Torque: 99 oz-in (7.1 kg-cm) at 4.8V
Bearings: 2-ball bearings
Gears: All Metal Gears
Street Price: $32.99
bron: www.futaba-rc.com
