Hot Racing HPi baja alu. parts
Moderator: Moderator's groep
- RonW
- Stamgast
- Berichten: 951
- Lid geworden op: wo nov 28, 2007 10:44 pm
- Land: NL
- Merk: Homemade
- Type: Monsterbeetle Pro XL
- auto 2: Losi
- Type 2: 22T
- Zenderset: Spectrum DX3C
- Frequentie: 2.4GHz DSM
- Club: RCLargescale
- Locatie: Ommen
- Contacteer:
Hot Racing HPi baja alu. parts
This is the 6061-T6 Aluminum Clutch Bell shaft Mount for the HPI 1/5 Baja Series.
FEATURES:
By utilizing the advantage of Multiaxial CNC lathes Hot Racing crated a solid structure yet light weight This Clutch Bell shaft Mount allows stock clutch bell to run much truer and with our SBJA400 to run perfectly true. Improve the life of your clutch and gears.
6061-T6 Aluminum construction, Black in color
INCLUDES:
One 6061-T6 Aluminum MA CNC Clutch Bell shaft
_________________________________________________________________
This is the Hot Racing Black Aluminum Front Upper Arms
for the HPI Baja 5B.
FEATURES:
E-clips free design.
6061-T6 Aluminum alum construction,
Anodized Black with CNC engraved silver lining
Stronger and light weight Upper Arm with extra webbing that improved strength over other designs.
INCLUDES:
Two Front upper arms
Four 3mm x 5mm screw to lock in the hinge pin.
These are direct fit parts to replace stock arms.
_________________________________________________________________
This is a pair of Hot Racing 6061 T6 Aluminum Alloy Front Lower Arms for the
HPI Baja 5B Series.
FEATURES:
CNC 6061 T6 Aluminum construction, silver and Black in color
Factory installed chrome Ball for smooth operation
INCLUDES:
Two Front Lower Arms
REQUIREMENTS:
Installation
SPECIFICATIONS:
Length: 5.65" (144mm)
Width: 3.18" (80.5mm) at the bulkhead
_________________________________________________________________
This is a pair of optional Hot Racing Rear Lower Arms
for the HPI Baja 5B.
FEATURES:
CNC 6061 Aluminum construction, Black in color
Replaces stock plastic arms
Stronger and light weight Arm with extra webbing that improved strength over other designs.
INCLUDES:
Two 6061 Aluminum Rear Lower Suspension Arms for the HPI Baja 5B
REQUIREMENTS:
Installing at rear of chassis
_________________________________________________________________
This is the Hot Racing Black Aluminum Rear Upper Arms
for the HPI Baja 5B.
FEATURES:
6061-T6 Aluminum alum construction,
Anodized Black with CNC engraved silver lining
INCLUDES:
Two Rear upper arms
REQUIREMENTS:
Installation on the Baja 5b
SPECIFICATIONS:
length: 3.03" (77mm)
width: 1.85" (47mm)
Thickness: .55" (14mm)
_________________________________________________________________
This is the Hot Racing Vented Heavy-duty Clutch Bell for the HPI Baja,
Comes off of the crankshaft and drives the spur gear.
FEATURES:
CNC Precision machined
Heavy-duty steel construction
Vented to help dissipate heat
Harden Black in Color
INCLUDES:
(1) Vented Clutch Bell
REQUIREMENTS:
Installing clutch gear and putting on vehicle.
SPECIFICATIONS:
diameter: 2.26 (57.43mm)
Diameter that the gear sits on: 0.48 (12.2mm)
http://www.hot-racing.com/?c=193" onclick="window.open(this.href);return false;
- Bernie
- Bigscale Guru
- Berichten: 5043
- Lid geworden op: za jan 27, 2007 8:37 pm
- Land: Ollanda
- Provincie: Noord-Brabant
- Merk: Multiplex
- Type: FPV EZ*
- Zenderset: Futuba FF-9
- Frequentie: Mag ik zelf kiezen;)
- Club: Wildvlieger
- Website: www.rcbigscale.nl
- Locatie: Cuijk
- Contacteer:
Re: Hot Racing HPi baja alu. parts
Mooie onderdelen, jammer van dat paars bij die koppelingsklok .
Ik zie, ik zie, wat jij niet ziet .
Vliegfilmpjes
Vliegfilmpjes
- RonW
- Stamgast
- Berichten: 951
- Lid geworden op: wo nov 28, 2007 10:44 pm
- Land: NL
- Merk: Homemade
- Type: Monsterbeetle Pro XL
- auto 2: Losi
- Type 2: 22T
- Zenderset: Spectrum DX3C
- Frequentie: 2.4GHz DSM
- Club: RCLargescale
- Locatie: Ommen
- Contacteer:
Re: Hot Racing HPi baja alu. parts
Maar dat paarse kan er wel af
- Dennis156
- Junior gebruiker
- Berichten: 8
- Lid geworden op: ma okt 06, 2008 10:22 pm
- Provincie: Limburg
- Merk: king motor (HPI)
- Type: Baja 5b
- Zenderset: futaba
- Locatie: Belfeld
Re: Hot Racing HPi baja alu. parts
oops al gezegdBernie schreef:Mooie onderdelen, jammer van dat paars bij die koppelingsklok .
kan je er zo afschroeven is show
http://rc-car-online-shop.de/homepagead ... 230&lang=d
alu tuning ( deze maand aanbieding)
- RonW
- Stamgast
- Berichten: 951
- Lid geworden op: wo nov 28, 2007 10:44 pm
- Land: NL
- Merk: Homemade
- Type: Monsterbeetle Pro XL
- auto 2: Losi
- Type 2: 22T
- Zenderset: Spectrum DX3C
- Frequentie: 2.4GHz DSM
- Club: RCLargescale
- Locatie: Ommen
- Contacteer:
Re: Hot Racing HPi baja alu. parts
Als ik eerlijk ben,,,,,,,,
Dan vind ik dat HR alu. mooier dan dat GPM alu. dat bij hobbythek te koop is.
Dan vind ik dat HR alu. mooier dan dat GPM alu. dat bij hobbythek te koop is.
- Baja Edje
- Actieve poster
- Berichten: 200
- Lid geworden op: wo mar 05, 2008 7:58 pm
- Merk: HPI
- Type: Baja 5T
- Zenderset: Futaba 3PKS
- Frequentie: 2.4GHz FASST
- Club: Main Meetings Raalte
- Website: www.mainmeetingsraalte.nl
- Locatie: Raalte
- Contacteer:
Re: Hot Racing HPi baja alu. parts
ik vind het alu wat ik in mijn shop heb mooier
HPI Baja 5T / G270RC 29CC Race Ported / Futaba 3PKS 2.4GHz FASST / X-Can + Large X-port
http://www.mainmeetingsraalte.nl" onclick="window.open(this.href);return false;
http://www.mainmeetingsraalte.nl" onclick="window.open(this.href);return false;
- RonW
- Stamgast
- Berichten: 951
- Lid geworden op: wo nov 28, 2007 10:44 pm
- Land: NL
- Merk: Homemade
- Type: Monsterbeetle Pro XL
- auto 2: Losi
- Type 2: 22T
- Zenderset: Spectrum DX3C
- Frequentie: 2.4GHz DSM
- Club: RCLargescale
- Locatie: Ommen
- Contacteer:
Re: Hot Racing HPi baja alu. parts
Heb jij een roze zonnebril op,,,,,,,,,
- Baja Edje
- Actieve poster
- Berichten: 200
- Lid geworden op: wo mar 05, 2008 7:58 pm
- Merk: HPI
- Type: Baja 5T
- Zenderset: Futaba 3PKS
- Frequentie: 2.4GHz FASST
- Club: Main Meetings Raalte
- Website: www.mainmeetingsraalte.nl
- Locatie: Raalte
- Contacteer:
Re: Hot Racing HPi baja alu. parts
een paarse
HPI Baja 5T / G270RC 29CC Race Ported / Futaba 3PKS 2.4GHz FASST / X-Can + Large X-port
http://www.mainmeetingsraalte.nl" onclick="window.open(this.href);return false;
http://www.mainmeetingsraalte.nl" onclick="window.open(this.href);return false;
Re: Hot Racing HPi baja alu. parts
@ Heb liever helemaal geen zonnebril op,geef mij maar een skibril ,gr.Dr.Dre.RC Tuning Raalte schreef: een paarse
Wie is er online
Gebruikers op dit forum: Geen geregistreerde gebruikers en 39 gasten