Nieuwe offroad band: V-pin competition tire

Universele/uitwisselbare onderdelen tusen verschillende merken en accessoires
(b.v. koppeling, schokbrekers, banden, velgen, luchtfilter, (hydro)remmen e.d.)

Moderator: Moderator's groep

Gebruikersavatar
Roel
Bigscale Guru
Bigscale Guru
Berichten: 3609
Lid geworden op: za jan 27, 2007 8:22 am
Land: Nederland
Provincie: Limburg
Zenderset: Futaba 3PKS
Frequentie: Spektrum Pro 2.4GHz
Locatie: Panningen

Nieuwe offroad band: V-pin competition tire

Berichtdoor Roel » do sep 03, 2009 6:17 am

Afbeelding
Nieuwe offroad band: V-pin competition tire

AfbeeldingAfbeelding

The V-pin competition tire is particularly suitable for tracks with loose and sandy surface.

The high tread profile, extended to the tire shoulder requires a high manufacturing cost.

This tread design guarantees an extremely high side traction and provides maximum propulsion especially on surfaces like sand and loose soil for optimum.

A well proven combination is the use of Mammoth tires in the rear and V-pin at the front.

By cutting of the tread profile of the V-pin tires you can adjust your car’s handling easily. The partly or nearly complete removal of the V-pin tire’s tread on the outside of the tire, greatly affects the tire’s side bite when cornering.

Please take a look at the corresponding pics:
Pic A – very high lateral grip = car tends to oversteer
Pic B – high lateral grip = still sharp steering response
Pic C – reduced lateral grip = neutral handling
Pic D – low lateral grip = expect the car to understeer

Pic A
Afbeelding
Pic B
Afbeelding
Pic C
Afbeelding
Pic D
Afbeelding

Of course, the before mentioned does depend on the track surface!

Summarized: removing tread from V-Pin tires on the front axle will reduce oversteering, calm your car and make it easier to drive.

When oversteering is extreme (i.e. high grass) you may even start cutting the tread on the inside shoulder. This can prevent your car from those annoying traction rolls.

For very loose soil the soft compound is recommended, under normal condition the medium compound is usually your best choice.

HPI Baja 5 cars can also use these tires when equipped with special adapters.

Diameter 163 mm
Width 65 mm

Prices of the components:
V-Pin tires € 39.90 / pair
V-Pin tire inserts € 9.90 / pair
Rims FG 6105/01 € 14.90 / pair
glue set y0067 € 13.30
Total € 78.80
Ready mounted and glued € 69.90 / pair
Afbeelding
Afbeelding
Afbeelding
Afbeelding

bron: www.rc-car-online-shop.de
Velle est posse

Gebruikersavatar
Bart
Al langer hier
Al langer hier
Berichten: 351
Lid geworden op: za jan 27, 2007 9:48 pm
Land: Nederland
Provincie: Limburg
Merk: Tamiya
Type: M05R Swift/Mini
Zenderset: Futaba 4PK
Frequentie: 2,4ghz
Locatie: Baarlo
Contacteer:

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor Bart » do sep 03, 2009 7:47 am

Lijkt zeer veel op de Elcon Quartz :-k
Afbeelding

Gebruikersavatar
rc-rob
Forum verslaafd
Forum verslaafd
Berichten: 1346
Lid geworden op: ma aug 13, 2007 5:01 pm
Land: NL
Provincie: Overijssel
Merk: Hormann
Type: Tk10
Zenderset: Sanwa M11 x
Website: www.rcbigscale.nl
Locatie: Haaksbergen

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor rc-rob » do sep 03, 2009 10:14 am

Ja identiek volgens mij :shock: ..en nog duurder ook :mrgreen:
lijkt wel of ze op het ene plaatje noppen hebben weggeknipt en op de andere niet.. :shock:
Afbeelding
Hörmann TK10

Gebruikersavatar
themaggdaddy
Junior gebruiker
Junior gebruiker
Berichten: 12
Lid geworden op: zo mar 30, 2008 8:11 pm

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor themaggdaddy » do sep 03, 2009 10:25 am

Nee dat zijn de opties die de handling van de band beinvloeden. Maar goed het is een Quartz kopie. Kan dan beter bestellen bij Krikke als je interesse in deze band hebt.

Gebruikersavatar
njoy_fg
Regelmatig hier
Regelmatig hier
Berichten: 527
Lid geworden op: vr jun 15, 2007 6:22 pm
Merk: Tamiya
Type: M-03R
Zenderset: Futaba 4pk
Frequentie: 2,4Ghz
Club: MRCZ

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor njoy_fg » do sep 03, 2009 10:26 am

verklaring staat erboven Rob :-$, alleen dat ze nou heel die rij eraf knippen :-s

dat merk, of het van hobbythek is weet ik niet, maar heeft ook die brede hormanns
gekopieerd :-k

Wie weet rijdt het met een andere rubbersoort wel heel "anders" dan de Elcon Quartz :mrgreen:
Afbeelding

Gebruikersavatar
rc-rob
Forum verslaafd
Forum verslaafd
Berichten: 1346
Lid geworden op: ma aug 13, 2007 5:01 pm
Land: NL
Provincie: Overijssel
Merk: Hormann
Type: Tk10
Zenderset: Sanwa M11 x
Website: www.rcbigscale.nl
Locatie: Haaksbergen

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor rc-rob » do sep 03, 2009 10:53 am

Oeps zie het :oops: :-$ :mrgreen:
Afbeelding
Hörmann TK10

Gebruikersavatar
Roel
Bigscale Guru
Bigscale Guru
Berichten: 3609
Lid geworden op: za jan 27, 2007 8:22 am
Land: Nederland
Provincie: Limburg
Zenderset: Futaba 3PKS
Frequentie: Spektrum Pro 2.4GHz
Locatie: Panningen

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor Roel » do sep 03, 2009 11:51 am

rc-rob schreef:Oeps zie het :oops: :-$ :mrgreen:
Ik heb even de goede plaatjes, met hoe je de banden kan knippen, erbij gezet.
Velle est posse

Gebruikersavatar
Appel007
Ingeburgerd
Ingeburgerd
Berichten: 99
Lid geworden op: vr okt 10, 2008 11:12 pm
Land: NL
Provincie: Drenthe
Merk: Hormann Monster
Type: HT2
Zenderset: 3pks
Frequentie: 2.4ghz
Locatie: Assen

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor Appel007 » do sep 03, 2009 11:59 am

Wat ik me afvraag is of die hele kleine aanpassingen wat je kan zien op de foto's ook echt een verschil maakt :???: ? Of is het meer een marketingtrucje.

groeten Arjan.
Hormann Monster HT2, Hormann TK08, Hormann Truck!?

Gebruikersavatar
Onno
Bigscale Guru
Bigscale Guru
Berichten: 44
Lid geworden op: ma okt 13, 2008 10:36 pm
Land: NL
Club: HMRC
Contacteer:

Re: Nieuwe offroad band: V-pin competition tire

Berichtdoor Onno » do sep 03, 2009 8:35 pm

Iemand heeft de kopieermachine aangezet, raar dat het dan duurder moet zijn.
Je haalt ze bij Elcon of 1 van de dealers voor 34.50 inclusief inlays.

Ah nee ik zie het en snap het nu...
De meerprijs zal wel zitten in de extra V die op deze band zit denk ik :mrgreen:

@ Appel007: elke knip maakt verschil en soms meer dan je denkt of verwacht. Je kunt er nog eideloos veel varianten op bedenken. Knippen van bandjes is een nationale sport geworden op wedstrijden geloof me. Heb er zelfs een aparte kniptang voor aangekocht.


Terug naar “Bigscale universele onderdelen”

Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers en 43 gasten